Target Components

Antec Performance 1 Full Tower E-ATX Highly Compatible PC Case

System Status at a Glance - Temperature Display
By pressing the switch button on the I/ O panel, users can glance at the temperature of the CPU and GPU on the temperature display. The temperature display can be switched from CPU to GPU temperature or turned off via the switch button.*
*Using Antec iUnity software.

Antec iUnity provides instant data on PC specs, loads and usage.

I/O Panel
Includes USB Type-C (10Gbps) for high-speed data transfer. Includes dust plugs for dust prevention and mic/ audio 2-in-1 port.

4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcasing visual effects.

Everything Organised - Cable Management On Point
Two cable covers are included for a tidy cable management area, with 30mm clearance.
There are 10 sets of Velcro straps for fan and I/O cable routing, 5 straps for hardware and power supply cables and 2 straps at the rear for I/O routing.

Easy Installation
Removable top cooling bracket.
Support for 1 x 420mm radiator and 1 x 360mm radiator.

4 x Preinstalled 30mm Thick Fans
3 x Storm T3 140mm PWM fans at front.
1 x Storm T3 120mm PWM fan at the rear.
A 1-to-3 fan splitter cable with PWM function is included.
The Storm T3 PWM fan features thicker and longer fan blades, efficiently increasing air intake, balancing between cooling and silence.

Exquisite Steel Mesh
The mesh front panel features 1.2mm vent holes and a magnetic clip-on design with easy access.

Best Airflow Path for GPU Cooling
Airflow-enhancing mesh front panel provides massive air flow. Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for GPU cooling.

Magnetic Dust Filters
Top magnetic dust filter
Front magnetic and clip-on dust filter
Bottom full-sized pull-out dust filter

Supports RTX 40 Series Graphics Cards
Full-tower PC case in 230mm width supports 40 Series GPUs and high-end PC components.

Modular Drive Trays
Supports up to 5 x drives - 2 removable drive trays for 3.5-inch HDD/ 2.5-inch SSD and 3 x drive trays for 2.5-inch SSDs.

Cooling Compatibility
Support for up to 10 x fans

More Features
Stud fixings for a more convenient DIY experience.
Drop-Proof Bolt hook design avoids side panel damage
8 x Fully open PCIe Slots - bridgeless design supports vertical GPU installation
Back-Mounted PSU Bracket for easy installation
4 x rubber grommets for cable routing
Rear velcro straps for rear I/O cable routing


Specifications

Dimensions
522 x 230 x 522 mm (DWH)

Form Factor
Full Tower

Materials
Steel + Plastic + Glass

Mainboard Support
E-ATX, ATX, Micro-ATX, ITX

Front Access & Controls
Power, Reset , USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1

Side Panel
4mm Tempered Glass(Both Sides)

Drive Bays
Expansion Slots
8

3.5" / 2.5"
2 / 2

2.5"
3

Fan
Front
3 x 120mm / 3 X 140mm

Top
3 x 120mm / 3 x 140mm

Power Supply Shroud
3 x 120mm

Rear
1 x 120mm

Radiator Support
Front
120 / 140 / 240 / 280 / 360 / 420mm

Top
120 / 140 / 240 / 280 / 360mm

Rear
120mm

Clearance
Max GPU Length
= 400mm

Max CPU Cooler Height
= 175mm

Max PSU Length
(Include cable) = 245mm(with HDD)
(Include cable) = 440mm(without HDD)

Misc
Dust Filter
Front / Top / Bottom

Net Weight
12.55Kgs

Gross Weight
14.85Kgs

Warranty
2 Years